Ring shank collated nails on wire coil represent a professional category of industrial nails designed for fast, continuous, and large‑scale installation with pneumatic
Type:
Blue TER nail (thermo-refined, blue oxidized)
Material:
Low-carbon high-strength steel, hot-dip galvanized
Usage:
Manual hammering or pneumatic nailer
Dimensions and number of pieces per box:
2,5×30 mm – 14.400 kom
2,5×35 mm – 14.400 kom
2,5×40 mm – 14.400 kom
2,5×50 mm – 12.000 kom
2,5×55 mm – 9.600 kom
2,5×60 mm – 9.600 kom
2,5×64 mm – 7.200 kom
2,5×70 mm – 7.200 kom
2,8×40 mm – 12.000 kom
2,8×50 mm – 10.000 kom
2,8×60 mm – 8.000 kom
2,8×70 mm – 6.000 kom
2,8×80 mm – 6.000 kom
3,1×80 mm – 5.400 kom
3,1×85 mm – 3.600 kom
3,1×90 mm – 5.400 kom
3,4×90 mm – 3.600 kom
The construction with a ring shank profile provides exceptionally strong grip in wood — the nail does not pull out under load, even with vibrations, dynamic climate changes, variations in humidity, or constant movement of the structure.
The nails are connected with wire in a spiral coil (collated form), which allows uninterrupted work, high driving speed, and stable feeding of nails into the tool. For this reason, this type of nail is standard in the construction industry, pallet production, packaging, prefabricated houses, structures, and serial production lines where workflow continuity is crucial.
Although they are not galvanized and are intended primarily for indoor use or outdoor work without prolonged exposure to moisture, they feature exceptional tensile strength and holding power that far surpasses ordinary smooth nails.
Each nail undergoes tumbling and mechanical cleaning for quality processing, smooth passage through the tool, and prevention of jamming. The tip is sharp, the body precisely shaped, and the spiral ring shank provides a firm, long-lasting joint even under intensive use.
– Types: ring shank nails in wire coil (collated nails)
– Shank profile: ring shank for maximum holding force and resistance to pull‑out
– Collation: wire spiral coil for continuous work without reloading interruptions
– Materials: high‑strength steel
– Processing: tumbling + fine cleaning to remove edges and ensure smooth tool passage
– Finish: ungalvanized (standard black steel, possibly lightly oiled)
– Tip: shaped for easy penetration into wood and board materials
– Applications: pneumatic/compressor nailers for coil system, industrial assembly
– Advantage: high installation speed, high productivity, reliable fastening
Ring shank coil nails are used in the wood industry, in fast‑joining systems, and in all sectors where assembly speed and extreme joint strength are important. They are ideal for structures subject to vibrations, bending, frequent loads, or where there is a risk of joints loosening.
Most common uses:
Construction: roof and floor structures, frames, battens, wall substrates, formwork, substructures
Industry and production: pallets, packaging, crates, serial installation, prefab systems
Carpentry and workshops: panels, structures, interior partitions, glued joints
Hobby and garage use (with pneumatic tools): DIY projects, small structures, quick assembly
– Up to five times stronger holding power compared to smooth standard nails
– Ring shank prevents pull‑out under vibration and load
– Spiral wire coil enables continuous, fast work without interruptions
– Ideal solution for pneumatic tools, industrial lines, and pallet production
– Precise processing reduces risk of jamming in nailers
– High productivity, less worker fatigue, faster execution
– Reliable joint in structures where durability is a priority
